Stainless steel table with three sinks
Type: Hotel Furniture | General Use: Commercial Furniture | Material: Metal | Metal Type: Stainless Steel |
Appearance: Modern | Size: Lx750x850/950 | Place of Origin: Vietnam | Brand Name: Hayenind |
Top is attached with channels for added rigidity. Legs with adjustable feet for leveling are reinforced by cross braces. Sink is all welded to top with a drain opening and overflow at bottom. Faucet has hot and cold supply lines. Table is polished without rough edges
- Sinks on the left or right or at the middle are optional.
I. Function – Working environment
Function: Wash kitchen equipment, fresh food before cooking, coffee storage and pre equipments for bar
II. Feature
1. Top
- Stainless steel 304 No.4 t=1.2 mm top
- Stainless steel 304 No.4 t=1.0 mm gusset
- Stainless steel 304 No.4 t=1.0 mm channel cross the table for reinforcement
- Gusset and channel are attached to top, under shelf and middle shelf by glue specified for stainless steel
2. Leg and cross brace
- Stainless steel 304 tubing ø38 t=1.2 mm legs
- Stainless steel 304 tubing ø22 t=1.0 mm cross braces
- Legs are TIG welded to gusset and cross braces
- Stainless steel ø38 adjustable feet
- Adjustable feet are attached to legs
3. Sink
- Stainless steel 304 No.4 t=1.2 mm sink
- Sink is welded to top
- Stainless steel drain opening
- Stainless steel overflow D38x235mm
- Stainless steel ø3 perforated trash screen
- Viet – Italy 250mm galvanized sink faucet with 2 hot and cold water supply lines.
4. Detail table
No. | Specification | Material | Quantity |
1 | Top | Stainless steel 304 No.4 t=1.2 | 1 |
2 | Gusset | Stainless steel 304 No.4 t=1.0 | 2 |
3 | Leg | Stainless steel 304 tubing ø38 t=1.2 | 4 |
4 | Adjustable feet D38 | Stainless steel | 4 |
5 | Top channel | Stainless steel 304 No.4 t=1.0 | 2 |
6 | Sink | Stainless steel 304 No.4 t=1.2 | 1 |
7 | Cross brace | Stainless steel 304 tubing ø22 t=1.0 | 4 |
III. Technical parameter
Specification | Standard |
Dimension | Lx1800x750x850/950 ( L = 1800 – 2300 ) |
Sink dimension | 450x450x300 or 650x450x300 |
Backsplash width | 25mm |
Backsplash height | 100mm |
Cross brace | Stainless steel 304 tubing ø22 |
Floor to cross brace | 150mm |
Leg | Stainless steel 304 tubing ø38 |
Adjustable feet D38 | 35<N<55 |
IV. Checking standard
-All sink corners are coved at a 20mm radius, polished without pock-mark
- Sink rims are welded to top without pock-mark
- Channels are attached to top by glue specified for stainless steel, 100mm away from sink.
- Distance between channels is equal
- Legs and cross braces are all welded ground
- Top is smooth without scratch and wrinkle due to welds
Packaging Detail:Carton |
Delivery Detail:Depend on Quantity |