Mobilephone/camera,/video film/bathroom and so on anti-slip
Type: Other Baby Furniture | Material: PVC | Size: 41*41*33cm G.W.15kgs | Place of Origin: Guangdong China (Mainland) |
Brand Name: shindorn | Pattern: Various Pattern |
Specifications
2-10 colors anti-slip treads on various material stairs.
Use removable glue. Super glue.
Comfortable concavo-convex surface.
Cartoon Anti-slipping
Quick Details: (Anti-slip roll)
Material: PVC or TPU | Use: Toilet and Kitchen or tub or various stairs. |
Adhesive side: Single Sided | Adhesive : Acrylic or Rubber |
Adhesive type: Water activated | Design printing: Clients offer |
Color: Any | Pattern: Any |
Brand name: Glutex or ShinDorn | Width: 3cm to 112cm (roll) |
Length is 5m to 1500m (roll) | Pass Reach standard. |
Waterproof | Service time: 2 years. |
Weather resistance | Thickness is 0.9mm |
Glue thickness is 0.02-0.1mm | PVC thickness is 0.7mm |
Removable adhesive | No damage floor or tub or wall or stairs when remove |
Fit various material tub or floor |
Packaging & Delivery:
Packing detail | packing as buyer need or normally in carton |
Packing detail | 6pcs see animals shapes with poly bag with head card as one card. 288cards/Master carton/14*14*30cm G.W.8kgs |
Delivery Detail | 20-40days |
Specifications:
Use range | Effectively prevent people slipping on massage room, shower, bathroom, washroom, lavatory, wet place, kitchen,step stairs. toilet, massage bathtub, bathtub, stair, wet place, especially old people, kids, and workman |
Surface | comfortable and obvious concavo-convex |
Color | 1-10 printing color on transparent PVC |
Glue Viscosity | 1. 25°C is 2800-3500cps/LTV. 2. Glue thickness is 0.10m/m 3. Glue solid cement 55% 4. Curing time: 20-30 minutes for finger touch, 24hours for whole dry. |
Pass test by SGS | EN71 part III, part 9, ASTM963.03, ASTM D3421-75, no BBP, no No DBP, no DEHP, it fit Europe Reach standard and U.S.A. TSCA standard. |
Features | water and weather resistance |
Use way | 1. Clean the floor or Wall 2. Tear out the paper of treads, and put it on place as you wish |
How to apply | 1.For porcelain, steel, and cast-iron tubs, clean tub surface with non-abrasive scouring powder and warm water. For fiberglass, ABS and other plastic tubs, clean surface according to manufacturer’s instructions. Warning: Do not use liquid or aerosol cleaners to prepare surface or tub treads will not adhere properly. Stairs are same. 2.Rinse thoroughly. Allow the tub to dry. 3.Arrange tub treads in the tub with the backing in place to determine ideal positioning. 4.Position tub treads at least one to three inches apart for better surface coverage. 5.Remove backing from tub tread and apply one at a time to tub surface. 6.Press tub tread evenly on the tub surface and try to avoid stretching. 7.Repeat steps 4 and 5 with additional tub treads until all the tub treads are applied. 8.Allow the tub treads to stand for at least 12 hours before using tub or shower. |
How to remove | 1.Lift corner of tub tread with finger nail, wood or plastic scraper. Warning: Do not use metal, glass, or other abrasive scraper to remove. 2.Slowly Peel back tub treads until removed. 3.If any adhesive residue remains, clean with aerosol stain remover. 4.Allow to soak for 15 minutes and wipe with a dry rag. Repeat as necessary. 5.Rinse thoroughly. Allow the tub to dry. |
Dry time | Drying/curing condition: room temperature 24 house. |
Shape | Animals, Sea Animals, Various shapes as your wish |
Factory pass | ISO-9001:2008 Quality serious system and ISO14001:2004 Environment system. |
Packaging Detail:4 pcs sea animals 10*10cm in one blister card. 24cards/inner box, 288cards/Master carton/41*41*33cm G.W.15kgs |
Delivery Detail:21days |