Manuel recliner mechanism 4302 - 4302

The design of enhancing the footrest enlarges leg room for more comfort.
KD back brackets allow easy back removal for handling.
The wood frame designed for the Rocker, Glider and Lift recliner are all interchangeable.
Available in -1, -2, -3, -10 etc.
seat widths.A cable/lever, outside handle, inside handle, and “D” ring can be used for release.
Be applied to chairs, loveseats, sofas and sectionals – optional rail or modular construction.
5302 is the motorized version of 4302 mechanism.

plywood package, 864 sets/20’C, 1440 sets/40’C.

Profile shape designed for safety and appearance without pinch
points.
Articulating design allows use of wider & higher mid-ottoman for
elimination of entrapment areasand for leg support.
Occupant's weight used to balance operation instead of springs.
Therefore, the opening, closing, ottoman firmness, and back
balance while reclining vary with the weight of the occupant
Making the operation consistant from one person to the next.
Springs are used for locking and the initial start of the opening.
Occupant's weight opens chair, handle/lever only unlocks mechanism.
Slight footrest pressure closes ottoman.
Square drive tube connects to and controls both left & right sides.
Ottoman is locked closed on both sides.
Improved weight capacity and durability (250 pound occupant
weight).
Mechanism base width is closer to seat width while maintaining
sufficent clearance between links to eliminate possibility of
interference.
Eliminates problems with flexing and breaking of tube end at
bend. Flange is on heavy gauge link instead of the lighter gauge
tube which can flex and break.
Unique design of flattened tube end maximizes torsional
strength unlike non-tubular cross members which have no
significant torsional strength.
All rivet joints have either acetal(Delrin) or Bronze bushings and
acetal spacers to elminate any steel-to-steel contact.
No metal-to-metal noises when links contact stop pins.
All Recliners are interchangeable in the same frame if the frame
is constructed for Rocker and Two-Motor Lift