fume hood - TFG

1.Fume Hood (fume cupboard & fume cabinet):Exterior materials: Quality 1.2mm cold-rolled steel construction cabinets finished in 0.5mm safety epoxy enamel perfect for resisting corrosion and heat.

2.Interior materials: All interior surface of fume hoods are made of chemical resistant plate, it was developed to have excellent chemical- resistance and anti high temperature.

3.Sash: The full view vertical raising sash is manufactured of laminated safety glass with the sash set into an extruded, low turbulence PVC track that delivers smooth operation and steady sash positioning.

4.Worktops: Equipped with phenolic resin, epoxy resin, stainless steel board or ceramics to meet your specific needs.

5.Baffles: Made up of three parts, which can make the exhaust controlled and take away.

6.Lighting: 30W lighting and switch, which can make the worktop to have the 450LUX lighting standards.

7.Power: Multi-function power plug.

8.Lab fittings: Equipped remote control valve and cup sink.

9.Exhaust system: The exhaust collar connects the fume hood to the exhaust duct. 10.Depending on the fume hood size, there may be one or two collars of either 200mm or 315mm diameter.

11.Exterior Dimensions: 1200/1500/1800*800*2400mm

12.Air Volume: 1750m3/h (1500*800*2400mm)

Process and Materials

FUME HOOD L:1200/1500/1800,W:800,H:2350mm

Modular enclosure, the upperexhaust cabinet, in the middle operating table, the lower end of cabinet withan independent water, electricity, gas pipeline systems, three sections ofdiversion design, ventilation without dead ends and can effectively rule outtoxic gases.
Cabinet:OTC external use 1.2MM thickness of the framework of cold-rolled steelproduction, steel components by the pickling, phosphating treatment, thesurface through pickling, phosphating, surface electrostatic spraying epoxyresin powder, (barn) 180-degree heat curing, acid, moisture, rust, bearingperformance, long service life; inner partition 4mm thick with special chemical resistant laminatestimes, its tectonic design of explosion pressure release effect; the nextcabinet cabinet body uses 1.2MM the thickness of cold-rolled steel production,built-in load-bearing steel bracket, steel bracket with 60 * 30 * 1.5mm square steel tubes welded, all steelcomponents surfaces by pickling, phosphating, surface electrostatic sprayingepoxy resin powder, (barn) 180 high-temperature curing, acid, moisture, rust, bearing good performance, theoverall structural strong, long life, beautiful and generous.
Door:1.2mm thick with high-quality cold-rolled steel plate, inside and outside thedouble-buckle-formed, which filled with insulation material, all the partswelded together by the bending die stamping, welding part of the grinding,polishing smooth transition, without burr and forged welding joints the steelcomponent surfaces by pickling, phosphating, surface electrostatic sprayingepoxy resin powder, (barn) 180 high temperature curing, acid, moisture, rust, bearing good performance, theoverall structural strong, long life, beautiful generous.

Worktops: Phenolic resin, epoxy, ceramic, & stainless steel worktop areavailable. 12.7mm/15mm/17mm/19mm/
Resist strong acid and alkali, & high temperature, antibacterial, easy to clean, operating margin before thepolished, elegant, and smooth, not to hurt the hand, rugged compact, resistantto strong impact, high temperature, acid, alkali and has a good load-bearingproperties.

Spoiler: Using 4mm specialchemical resistant laminates fold, three-lead wind, and solve the eddy currentphenomena of showcases and gas, more efficient emission of gases of differentdensities;
Distributionassembly: Air with leakage switch, microcomputer integrated circuitboards, the second AC contactor control circuit. Control the electrical box,install the next cabinet, easy maintenance.
Control panel:Touch, intelligent control panel. Regulating exhaust volume, make up airvolume, can also be connected inverter; control of lighting, sockets.

Lighting: A full-face holder design (with cooling holes),built-in 1 * 30W purifying light, luminosity ≥ 300LUX, hidden under thediversion plate, easy to repair.
Sink:The polymer PP cups, from the mold forming an integrated, acid and alkalicorrosion, antibacterial and easy to clean; supporting polymer PP launchingdevice, filter film, water-blocking cap, PP to the water extraction cage, toprevent debris clogging pipelines; crowd backing to installation, using thenatural water table of residual return nice.
Faucet:Single-port rotating the lead, copper casting, ceramic valve cores, highbrightness epoxy coating, anti-rust resistant, removable cleaning block, withinternal pressure relief. With PP Tap, removable in order to link circulatingtube or vacuum nozzle, and other special use.
Socket:The European-style universal socket 220V/10A Lid, small, beautiful, Waterproof,canmatch a variety of instruments socket.
Windows:Using 5mm floatglass, transparency, explosion-proof, window frames from the surface byelectrostatic spraying epoxy resin powder handling connections made of aluminumalloy profiles, wear-resistant, light slip, an effective solution to thetraditional stuck phenomenon, can be free stay. Windowopens height 20mm ≤ H ≤ 75mm in any location.
Glass slide:one forming aluminum alloy tank, the Trilateral inlaid with wear-resistant top,push up and down sliding glass light and no noise. Maintenance inside the door:use of acid and alkali PP sealing strip, with a maintenance window, easy tomaintain.

Hinge :
1. Self-sealing alloy hinges, door open [90 ° / 105 ° / 175°], the auto-close rebound silent, beautiful shape, no noise, corrosionresistance, long service life;
2. Hinge: The high-quality 304 # stainless steel hinge,resistant to corrosion, moisture, rust-proof, long service life and so on.
Handle:
1, a concave-shaped handle,and door body shape, surface after pickling, phosphating, epoxy powderelectrostatic spraying, (barn) 180 high temperature curing, resistant to corrosion, moisture, rust-proof, life lengthetc.;
2, a sub-type aluminumalloy Concave handle;
3, C-type stainless steel handle.
Adjustable feet: Using high-intensityadjustable feet, with waterproof and regulate the level of function.
Set Hood: The glass fiber reinforced plasticmaterial, have a strong acid and alkali corrosion, can be equipped withelectric air valve.