Electric mini lifter 24V DC Electric linear actuator for medical bed - OUKIN648

Adjustable medical bed using linear actuator 24v dc motor

Specification Instruction

1.You need to decide what stroke length and force actuator you need. The stroke length is the length the actuator moves through.

So as an example a 12" Stroke actuator will move 12", but note that the total length of the actuator when retracted will be about 7" (175mm) longer than the stroke.

So a 12" stroke actuator,the total retracted length is about 19" and 31" extended (19"+12").

2.The Min installation length( the total length when stroke retracted) of the actuator is about 7” (175mm, when stroke is 0mm) and it only can add but reduce.

For example, you need stroke 10”,so the Mini installation length is 17” , we can increase this length based 10”stroke,but can not reduce it.

3.The actuator itself is 12v or 24v DC, so if you have 12v or 24v electric power and switch, you can directly connect the actuator to them.

If have no this voltage power, we can provide the control parts( switch power supply, adaptor, remote control. Like the bellow picture 1 show ).

Remote control has wired and wireless type, Wireless is RF style. Adaptor is the receiver of the remote control. And the adaptor , remote control have to work together to operate.

If you change one,you have to change another.

4.The head connector of the actuator has two standard style, slotting and punching like the bellow picture 2 show. You should tell which one is proper for you

Adjustable medical bed using linear actuator 24v dc motor Specification